招标

招标

采购

资讯

服务热线

400-8566-100

全部分类

首页 > 招标信息 > 江西江钨硬质合金有限公司引进图像成型检测仪(第二次)国际招标公告[变更公告]

江西江钨硬质合金有限公司引进图像成型检测仪(第二次)国际招标公告[变更公告]

发布时间:2020-02-04 阅读:798

打印

江西江钨硬质合金有限公司引进图像成型检测仪(第二次)国际招标澄清或变更(1)


澄清或变更简要说明:受新型冠状病毒感染的肺炎疫情的影响,本项目投标截止时间(开标时间)后延
江西省机电设备招标有限公司受招标人委托对下列产品及服务进行国际公开竞争性招标,于2020-02-03在中国国际招标网发布变更公告。 本次招标采用传统招标方式,现邀请合格投标人参加投标。
1、招标条件
项目概况:该设备为招标人生产自用
资金到位或资金来源落实情况:招标人自有资金
项目已具备招标条件的说明:项目已经批准
2、招标内容:
招标项目编号:0628-194012102006/02
招标项目名称:江西江钨硬质合金有限公司引进图像成型检测仪(第二次)
项目实施地点:中国江西省
招标产品列表(主要设备):
序号 产品名称 数量 简要技术规格 备注
1 图像成型检测仪 1台 主要用于刀片、刀具或精密零件的检测。 可以测量任意两点间距离,半径,直径,圆心距度,垂线,平行线,角度,高度; 其他技术要求详见招标文件
3、投标人资格要求
投标人应具备的资格或业绩:1)投标人(仅针对国内代理商)须提交有效的企业法人营业执照原件或复印件加盖单位公章,其经营范围涵盖所投标货物内容; 2)代理商投标时须具有制造商针对本项目的唯一授权书原件。 3)投标人开户银行在开标日前三个月内开具的银行资信证明原件或复印件;
是否接受联合体投标:不接受
未领购招标文件是否可以参加投标:不可以
4、招标文件的获取
招标文件领购开始时间:2020-01-16
招标文件领购结束时间:2020-01-22
是否在线售卖标书:否
获取招标文件方式:现场领购
招标文件领购地点:江西省机电设备招标有限公司招标二部
招标文件售价:¥1000/$150
5、投标文件的递交
投标截止时间(开标时间):2020-02-21 10:00
投标文件送达地点:江西省机电设备招标有限公司二楼第五开标大厅
开标地点:江西省机电设备招标有限公司二楼第五开标大厅
6、投标人在投标前应在必联网(http://www.ebnew.com)或机 电产品招标投标电子交易平台(http://www.chinabidding.com)完成注册及信息核验。
7、联系方式
招标人:江西江钨硬质合金有限公司
地址:江西靖安县工业园
联系人:余莹
联系方式 :+86-13576553797
招标代理机构:江西省机电设备招标有限公司
地址:江西省南昌市省政府大院北二路92号咨询大厦二楼205室
联系人:姚先生
联系方式 :电话:+86-791-88858392 邮箱:yaochao@jxzxtz.com
8、汇款方式
招标代理机构开户银行(人民币): 中信银行南昌分行营业部(注:人民币境内账户,不接受境外汇款)
招标代理机构开户银行(美元): (外币账户):中行江西省分行
账号(人民币): 3115710014736497914
账号(美元): 191702305545
其他: 194702305543(欧元) 193202305549(日元)

Procurement of the Image forming tester for Jiangxi JiangWu Cemented Carbide Co.,LTD (the second tendering)(1)

Clarify or change:Due to the infection of pneumonia by new coronavirus, the deadline for submitting bids(Time of Bid Opening) is delayed.
Jiangxi Machinery & Electric Equipment Tendering Co. , Ltd. entrusted by the purchaser, invites sealed bids from eligible suppliers home and abroad for the supply of the following goods and/or service by way of International Competitive Bidding. The tender notice was released on www.chinabidding.com on 2020-02-03.
1.Bidding Conditions
Overview:the equipment is used by the tenderee itself for production.
Source of Funds:the tenderee’s owned fund
Description of The Prepared Bidding Conditions:already approved
2.Bidding Content:
Bidding No:0628-194012102006/02
Project Name:Procurement of the Image forming tester for Jiangxi JiangWu Cemented Carbide Co.,LTD (the second tendering)
Place of Implementation:Jing an city, Jiangxi Province,China.
List of Products:
NO. Product Name Quantity Main Technical Data Remarks
1 Image Forming Detector 1 set It is mainly used for the detection of blades, cutters or precision parts. It can measure the distance, radius, diameter, center to center distance, vertical line, parallel line, angle and height between any two points; See Details in the technical specifications and requirements of bidding document
3.Qualification Requirements For Bidder
Qualifications or Performance:1) The bidder (if the bidder is Agent in domestic ) must present the valid original business license or the copies with official seal on which the business range cover the contents of the bid. 2) The original exclusive authorization letter issued by the manufacturer for this project is also should be provided (if the bidder is the Agent in domestic). 3) The Bidder shall provide the bank reference letter issued within three (3) months prior to the time of bid opening in original or its copy;
Joint Bids:NOT Available
Bid without the bidding documents:NOT Available
4.Acquisition of Bidding Documents
Beginning of Selling Bidding Documents:2020-01-16
Ending of Selling Bidding Documents:2020-01-22
Sell bidding doc online or not:No
To Obtain:On-site Purchase
Place:No.2 Tendering Department of Jiangxi Machinery & Electric Equipment Tendering Co., Ltd.
Price of Bidding Documents: ¥1000/$150
Additional Instructions:No purchasing is available during holidays and festivals, and no refund after sale.
5.Bid Submission
Deadline for Submitting Bids/Time of Bid Opening (Beijing Time):2020-02-21 10:00
Place of Bid: the fifth bid opening hall on the second floor of Jiangxi Machinery &Electric Equipment Tendering Co., Ltd.
Place of Bid Opening: the fifth bid opening hall on the second floor of Jiangxi Machinery &Electric Equipment Tendering Co., Ltd.
6.The bidder needs to register before the tender on www.chinabidding.com.
7.Contact Details
Purchasers:JIANGXI JIANGWU CEMENTED CARBIDE CO.,LTD
Add.:County Industrial Park ,Jing’an city, Jiangxi Province,China.
Contact:Mrs Yu
Tel:+86-13576553797
Bidding Agency:Jiangxi Machinery & Electric Equipment Tendering Co. , Ltd.
Add.:Room 205, 2/F, No.92, bei’er Road, Jiangxi Provincial Government Courtyard, Nanchang, China
Contact:Mr Yao
Tel :+86-791-88858392 Email: yaochao@jxzxtz.com
8.Remittance Approach
Bank(RMB):(Domestic Account of CNY): Sales Department of Nanchang Branch of CITIC Bank
Bank(USD): (For Foreign currency):Bank of China, Jiangxi Branch.
Account NO.(RMB):3115710014736497914
Account NO.(USD):191702305545
Additional:Account No.: 194702305543(Euro) Account No.: 193202305549(Japanese yen)

请使用微信扫描二维码查看公告

“精彩纵横”

已截止 收藏

  • 截止时间

    2020-02-21 10:00:00

  • 采购人

    江西江钨硬质合金有限公司

查看主页

招标公告:江西江钨硬质合金有限公司引进图像成型检测仪(第二次)国际招标公告

江西省机电设备招标有限公司受招标人委托对下列产品及服务进行国际公开竞争性招标于2020-1-16 在中国国际招标网公告。本次招标采用传统招标方式,现邀请合格投标人参加投标。

一、招标条件

      1、项目概况:该设备为招标人生产自用

      2、资金到位或资金来源落实情况:招标人自有资金

    3项目已具备招标条件的说明:项目已经批准

 

二、招标内容:

1、招标项目编号:0628-194012102006/02

2、招标项目名称:江西江钨硬质合金有限公司引进图像成型检测仪(第二次)

3、项目实施地点:江西靖安

4、招标产品列表(主要设备):

序号

产品名称

数量

简要技术规格

备注

1

图像成型检测仪

1

主要用于刀片、刀具或精密零件的检测。

可以测量任意两点间距离,半径,直径,圆心距度,垂线,平行线,角度,高度

其他技术要求详见招标文件

三、投标人须具备的资格或业绩:

1投标人(仅针对国内代理商)须提交有效的企业法人营业执照原件或复印件加盖单位公章,其经营范围涵盖所投标货物内容;

2)代理商投标时须具有制造商针对本项目的唯一授权书原件。

3投标人开户银行在开标日前三个月内开具的银行资信证明原件或复印件

是否接受联合体投标:否

未领购招标文件是否可以参加投标:否

四、招标文件的获取

招标文件领购开始时间:2020116

招标文件领购结束时间:2020122

获取招标文件方式:现场领购

招标文件领购地点:江西省机电设备招标有限公司招标二部

招标文件售价:每份1000元人民币或150美元;

其他说明:招标文件领购后不退。节假日不领购。

 

五、投标文件的递交

投标截止时间(开标时间):2020269:30

投标文件送达地点:江西省机电设备招标有限公司二楼第五开标大厅

开标地点:江西省机电设备招标有限公司二楼第五开标大厅

六、投标人在投标前需在中国国际招标网上完成注册。评标结果将在中国国际招标网公布。

七、联系方式

招标人:江西江钨硬质合金有限公司

地址:江西靖安县工业园

联系人:余莹

联系方式:+86-13576553797

招标代理机构:江西省机电设备招标有限公司

地址:南昌市省政府大院北二路92号咨询大厦二楼205

联系人:姚先生

联系方式:电话:+86-791-88858392  邮箱:yaochao@jxzxtz.com

. 汇款方式

    名:江西省机电设备招标有限公司

开户行(人民币):中信银行南昌分行营业部(注:人民币境内账户,不接受境外汇款)

    号:3115710014736497914

开户银行(外币账户):中行江西省分行

  号:191702305545(美元)

194702305543(欧元)

193202305549(日元)

 

Jiangxi Machinery & Electric Equipment Tendering Co., Ltd, for and on behalf of the Tenderee, will hold international open competitive tender for the following products and services, which will be announced at http://www.chinabidding.com/ in 2020-Jan-16th . This tender will be implemented in the traditional way. The eligible tenderers are hereby invited to participate in the tender.

1. Terms of bidding                                                 

  Project profile: the equipment is used by the tenderee itself for production.

  Capital preparation or capital source checking information: the tenderee’s owned fund

  Description about project’s qualification for tendering: already approved

2. Bidding content:

IFB No.0628-194012102006/02

Project NameProcurement of the Image Forming Detector for Jiangxi JiangWu Cemented Carbide Co.,LTD(the second tendering)

Project Location.Jing an city, Jiangxi Province,China. 

List of tendering products (main equipment):

No.

Name of Product

Quantity

Brief Technical Specification

Remarks

1

Image Forming Detector

1 set

It is mainly used for the detection of blades, cutters or precision parts.

It can measure the distance, radius, diameter, center to center distance, vertical line, parallel line, angle and height between any two points;

See Details in the technical specifications and requirements of bidding document

3. Qualification and performance requirements of tenderers

1) The bidder (if the bidder is Agent in domestic ) must present the valid original business license or the copies with official seal on which the business range cover the contents of the bid.   

2)  The original exclusive authorization letter issued by the manufacturer for this project is also should be provided (if the bidder is the Agent in domestic).

3) The Bidder shall provide the bank reference letter issued within three (3) months prior to the time of bid opening in original or its copy;

Is Consortium Bid accepted: NO

Whether the bid can be participated in without purchasing bidding document: no

4. Obtaining of the bidding document

Beginning time of purchasing the bidding document: Jan.-16th, 2020

  Deadline of purchasing the bidding document: Jan.-22nd, 2020

Obtain tender documents: on-site purchase

Location of collecting the bidding document No.2 Tendering Department of Jiangxi Machinery & Electric Equipment Tendering Co., Ltd.

Sales price of the bidding document: upon non-refundable payment of CNY1000 or USD$150.

Other notes:. No purchasing is available during holidays and festivals, and no refund after sale.

5. Submission of Bidding Documents

Deadline for bid submission (Bid Opening) 9:30 Feb.6th, 2020

Address for bid submission: the fifth bid opening hall on the second floor of Jiangxi Machinery &Electric Equipment Tendering Co., Ltd.

Place for Bid Openingthe fifth bid opening hall on the second floor of Jiangxi Machinery &Electric Equipment Tendering Co., Ltd.

6.      The bidders should complete their registry on http://www.chinabidding.com before the deadline of bids submission. The bidding results will be publicized on http://www.chinabidding.com afterwards.

7. Contact Information

Tenderee: Jiangxi JiangWu cemented carbide co.,LTD

Address: County Industrial Park ,Jing’an city, Jiangxi Province,China.

ContactMrs Yu

Tel+86-13576553797

Tendering Agent: Jiangxi Machinery & Electric Equipment Tendering Co., Ltd.

   Address: Room 205, 2/F, No.92, bei’er Road, Jiangxi Provincial Government Courtyard, Nanchang, China

   Contact: Mr Yao

Tel+86-791-88858392  Email: yaochao@jxzxtz.com

8. Banking Information

Opening Bank of the Tendering Agent (Domestic Account of CNY): Sales Department of Nanchang Branch of CITIC Bank

Account No: 3115710014736497914

Opening Bank of the Tendering Agent (For Foreign currency):Bank of China, Jiangxi Branch.

    Account No.:     191702305545USD

Account No.: 194702305543Euro

Account No.: 193202305549Japanese yen

变更公告:江西江钨硬质合金有限公司引进图像成型检测仪(第二次)国际招标公告[变更公告]

江西江钨硬质合金有限公司引进图像成型检测仪(第二次)国际招标澄清或变更(2)


澄清或变更简要说明:受新型冠状病毒感染的肺炎疫情的影响,本项目投标截止时间(开标时间)再一次后延
江西省机电设备招标有限公司受招标人委托对下列产品及服务进行国际公开竞争性招标,于2020-02-17在中国国际招标网发布变更公告。 本次招标采用传统招标方式,现邀请合格投标人参加投标。
1、招标条件
项目概况:该设备为招标人生产自用
资金到位或资金来源落实情况:招标人自有资金
项目已具备招标条件的说明:项目已经批准
2、招标内容:
招标项目编号:0628-194012102006/02
招标项目名称:江西江钨硬质合金有限公司引进图像成型检测仪(第二次)
项目实施地点:中国江西省
招标产品列表(主要设备):
序号 产品名称 数量 简要技术规格 备注
1 图像成型检测仪 1台 主要用于刀片、刀具或精密零件的检测。 可以测量任意两点间距离,半径,直径,圆心距度,垂线,平行线,角度,高度; 其他技术要求详见招标文件
3、投标人资格要求
投标人应具备的资格或业绩:1)投标人(仅针对国内代理商)须提交有效的企业法人营业执照原件或复印件加盖单位公章,其经营范围涵盖所投标货物内容; 2)代理商投标时须具有制造商针对本项目的唯一授权书原件。 3)投标人开户银行在开标日前三个月内开具的银行资信证明原件或复印件;
是否接受联合体投标:不接受
未领购招标文件是否可以参加投标:不可以
4、招标文件的获取
招标文件领购开始时间:2020-01-16
招标文件领购结束时间:2020-01-22
是否在线售卖标书:否
获取招标文件方式:现场领购
招标文件领购地点:江西省机电设备招标有限公司招标二部
招标文件售价:¥1000/$150
5、投标文件的递交
投标截止时间(开标时间):2020-03-17 10:00
投标文件送达地点:江西省机电设备招标有限公司七楼第二开标大厅
开标地点:江西省机电设备招标有限公司七楼第二开标大厅
6、投标人在投标前应在必联网(http://www.ebnew.com)或机 电产品招标投标电子交易平台(http://www.chinabidding.com)完成注册及信息核验。
7、联系方式
招标人:江西江钨硬质合金有限公司
地址:江西靖安县工业园
联系人:余莹
联系方式 :+86-13576553797
招标代理机构:江西省机电设备招标有限公司
地址:江西省南昌市省政府大院北二路92号咨询大厦二楼205室
联系人:姚先生
联系方式 :电话:+86-791-88858392 邮箱:yaochao@jxzxtz.com
8、汇款方式
招标代理机构开户银行(人民币): 中信银行南昌分行营业部(注:人民币境内账户,不接受境外汇款)
招标代理机构开户银行(美元): (外币账户):中行江西省分行
账号(人民币): 3115710014736497914
账号(美元): 191702305545
其他: 194702305543(欧元) 193202305549(日元)

Procurement of the Image forming tester for Jiangxi JiangWu Cemented Carbide Co.,LTD (the second tendering)(2)

Clarify or change:Due to the infection of pneumonia by new coronavirus, the deadline for submitting bids(Time of Bid Opening) is delayed again.
Jiangxi Machinery & Electric Equipment Tendering Co. , Ltd. entrusted by the purchaser, invites sealed bids from eligible suppliers home and abroad for the supply of the following goods and/or service by way of International Competitive Bidding. The tender notice was released on www.chinabidding.com on 2020-02-17.
1.Bidding Conditions
Overview:the equipment is used by the tenderee itself for production.
Source of Funds:the tenderee’s owned fund
Description of The Prepared Bidding Conditions:already approved
2.Bidding Content:
Bidding No:0628-194012102006/02
Project Name:Procurement of the Image forming tester for Jiangxi JiangWu Cemented Carbide Co.,LTD (the second tendering)
Place of Implementation:Jing an city, Jiangxi Province,China.
List of Products:
NO. Product Name Quantity Main Technical Data Remarks
1 Image Forming Detector 1 set It is mainly used for the detection of blades, cutters or precision parts. It can measure the distance, radius, diameter, center to center distance, vertical line, parallel line, angle and height between any two points; See Details in the technical specifications and requirements of bidding document
3.Qualification Requirements For Bidder
Qualifications or Performance:1) The bidder (if the bidder is Agent in domestic ) must present the valid original business license or the copies with official seal on which the business range cover the contents of the bid. 2) The original exclusive authorization letter issued by the manufacturer for this project is also should be provided (if the bidder is the Agent in domestic). 3) The Bidder shall provide the bank reference letter issued within three (3) months prior to the time of bid opening in original or its copy;
Joint Bids:NOT Available
Bid without the bidding documents:NOT Available
4.Acquisition of Bidding Documents
Beginning of Selling Bidding Documents:2020-01-16
Ending of Selling Bidding Documents:2020-01-22
Sell bidding doc online or not:No
To Obtain:On-site Purchase
Place:No.2 Tendering Department of Jiangxi Machinery & Electric Equipment Tendering Co., Ltd.
Price of Bidding Documents: ¥1000/$150
Additional Instructions:No purchasing is available during holidays and festivals, and no refund after sale.
5.Bid Submission
Deadline for Submitting Bids/Time of Bid Opening (Beijing Time):2020-03-17 10:00
Place of Bid: the second bid opening hall on the seven floor of Jiangxi Machinery &Electric Equipment Tendering Co., Ltd.
Place of Bid Opening: the second bid opening hall on the seven floor of Jiangxi Machinery &Electric Equipment Tendering Co., Ltd.
6.The bidder needs to register before the tender on www.chinabidding.com.
7.Contact Details
Purchasers:JIANGXI JIANGWU CEMENTED CARBIDE CO.,LTD
Add.:County Industrial Park ,Jing’an city, Jiangxi Province,China.
Contact:Mrs Yu
Tel:+86-13576553797
Bidding Agency:Jiangxi Machinery & Electric Equipment Tendering Co. , Ltd.
Add.:Room 205, 2/F, No.92, bei’er Road, Jiangxi Provincial Government Courtyard, Nanchang, China
Contact:Mr Yao
Tel :+86-791-88858392 Email: yaochao@jxzxtz.com
8.Remittance Approach
Bank(RMB):(Domestic Account of CNY): Sales Department of Nanchang Branch of CITIC Bank
Bank(USD): (For Foreign currency):Bank of China, Jiangxi Branch.
Account NO.(RMB):3115710014736497914
Account NO.(USD):191702305545
Additional:Account No.: 194702305543(Euro) Account No.: 193202305549(Japanese yen)


中标候选人公示:江西江钨硬质合金有限公司引进图像成型检测仪(第二次)中标候选人公示

江西江钨硬质合金有限公司引进图像成型检测仪(第二次)发布评标结果公示

项目名称:江西江钨硬质合金有限公司引进图像成型检测仪(第二次)
项目编号:0628-194012102006/02
招标范围:图像成型检测仪 1台
招标机构:江西省机电设备招标有限公司
招标人:江西江钨硬质合金有限公司
开标时间:2020-03-17 10:00
公示开始时间:2020-03-18
评标公示截止时间: 2020-03-20 23:59
候选人名单:
候选人排名 投标商名称 制造商 制造商国别及地区
1 基恩士(中国)有限公司 Keyence株式会社 日本

Procurement of the Image forming tester for Jiangxi JiangWu Cemented Carbide Co.,LTD (the second tendering)- Evaluation Results

Project Name:Procurement of the Image forming tester for Jiangxi JiangWu Cemented Carbide Co.,LTD (the second tendering)
Bidding No.:0628-194012102006/02
Bidding Content:Image forming tester 1set
Bidding Agency:Jiangxi Machinery & Electric Equipment Tendering Co. , Ltd.
Purchasers:JIANGXI JIANGWU CEMENTED CARBIDE CO.,LTD
Open-Time of Bids:2020-03-17 10:00
Publicity start time:2020-03-18
Ending Date of Evaluation Result: 2020-03-20 23:59
Who proposed the successful bidder:
rank Proposed Bid-winner Manufacturer Manufacturer Country
1 KEYENCE Keyence Corporation Japan

结果公告:江西江钨硬质合金有限公司引进图像成型检测仪(第二次) - 中标结果公告

江西江钨硬质合金有限公司引进图像成型检测仪(第二次) - 中标结果公告


项目名称:江西江钨硬质合金有限公司引进图像成型检测仪(第二次)
项目编号:0628-194012102006/02
招标范围:图像成型检测仪 1台
招标机构:江西省机电设备招标有限公司
招标人:江西江钨硬质合金有限公司
开标时间:2020-03-17 10:00
公示时间:2020-03-18 17:24 - 2020-03-20 23:59
中标结果公告时间:——
中标人:基恩士(中国)有限公司
制造商:Keyence株式会社
制造商国家或地区:日本

Procurement of the Image forming tester for Jiangxi JiangWu Cemented Carbide Co.,LTD (the second tendering) - Tender Awards


Project Name:Procurement of the Image forming tester for Jiangxi JiangWu Cemented Carbide Co.,LTD (the second tendering)
Bidding NO :0628-194012102006/02
Bidding Content:Image forming tester 1set
Bidding Agency:Jiangxi Machinery & Electric Equipment Tendering Co. , Ltd.
Purchasers:JIANGXI JIANGWU CEMENTED CARBIDE CO.,LTD
Open-Time of Bids:2020-03-17 10:00
Data of Evaluation Result:2020-03-18 17:24 - 2020-03-20 23:59
Data of Bidding Result:——
Final-Winner:KEYENCE
Manufacturer:Keyence Corporation
Manufacturer Country:Japan

平台声明

       版权声明:本公告信息为精彩纵横独家商机信息,版权所有。未经发布单位书面许可,其它任何网站或个人不得转载。否则,发布单位有权追究转载者的责任。

       友情提醒:为保证您能够顺利投标报名,请在投标报名或购买招标文件前向招标代理机构或采购商咨询投标详细要求,具体要求及项目情况以招标代理机构或采购商的解释为准。

       精彩纵横客服电话:400-8566-100


相关推荐 更多+

在线客服
QQ客服
电话客服

400-8566-100

二维码

精彩纵横公众号

打开微信扫一扫

回顶部
北京快乐8 棋牌游戏| 天天棋牌| 棋牌游戏| 天天棋牌| 斗牛棋牌|